using sweep in solidworks

For some reasons Solidworks is not letting me select any of the guide curves.
Some of the application examples are create spring model, complex hollow pipes, air conditioning ducts, curved rods, tubes, twisted parts etc.
You can now select faces, edges, and curves directly from models as sweep profiles.
If you are advanced SolidWorks user please avoid.
Ick, view Orientation Isometric.A single edge or reference geometry curves that contain a smooth, closed loop.Solidworks swept boss or base feature to create different, solidworks parts.Also Read, solidWorks Heads-up Toolbar on raffles royal hotel pte ltd this blog.Please let me know what i'm doing wrong, or if there is a better way to achieve what i'm looking for.Enhanced selection is supported with Boss, Base, Cut, Surface, and Assembly cut sweep features.In this example, I select the left end of the line sketch as First Reference.Answer, comments 0 2 Answers, looking at the screenshot I suspect there are some Problem in your sketch.Ick on, front Plane and click, sketch.For swept profile select Sketch1 (circle) and for path click on Sketch2 (curve).



In the PropertyManager: Select a sketch in the graphics area for Profile.
Note : Dimensions are taken roughly for this tutorial.
Step-1: Create New Part File, open the Solid works and New part File.
You can loft it by creating another cross section.I would really appreciate some help.1 Profile 2 Path, click one of the following: Swept Boss/Base on the Features toolbar or Insert Boss/Base Sweep.I hope you understand how to use swept boss in solidworks cad software.I think you should understand about the.Hotshotracer91 :-, in this Solidworks tutorial, I am going to create solidworks part as shown in the figure.Simply draw line sketch contain bend (direction changes from 45 to 90 degree).This Solidworks tutorial is for beginners, students or people likes to learn about SolidWorks.At this stage either the face or the edge of the existing body can be selected for a Profile.However, if the profile is different to a circle, it needs to be sketched; or in the quickest way be converted from the existed edges or faces.


[L_RANDNUM-10-999]